e-sales@shinyo-ecommerce.com
| SPECIFICATION | • Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst • Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 11,500 PSI (790 bar) Burst • Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 6,500 PSI (448 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Steel componentry is plated using ROHS Compliant Trivalent Chrome. |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 30- Series Automatic Interchange & Parker 20-Series Manual Interchange • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler. |
| SIZE | PART NUMBER | HOSE ID | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | D2S2 | 1/4″ | Steel | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.04 |
| 1/4″ | D2S2-B | 1/4″ | Brass | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.05 |
| 1/4″ | D2S2-S | 1/4″ | 303 Stainless | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.05 |
| 1/4″ | D2S2.5 | 5/16” | Steel | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.04 |
| 1/4″ | D2S3 | 3/8″ | Steel | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.05 |
| 1/4″ | D2S3-B | 3/8″ | Brass | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.05 |
| 1/4″ | D2S3-S | 3/8″ | 303 Stainless | 2.09 | 53.1 | 0.56 | 14.2 | – | 0.05 |
| 3/8″ | D3S2 | 1/4″ | Steel | 2.21 | 56.1 | 0.75 | 19.1 | – | 0.06 |
| 3/8″ | D3S3 | 3/8″ | Steel | 2.21 | 56.1 | 0.75 | 19.1 | – | 0.07 |
| 3/8″ | D3S3-B | 3/8″ | Brass | 2.21 | 56.1 | 0.75 | 19.1 | – | 0.08 |
| 3/8″ | D3S3-S | 3/8″ | 303 Stainless | 2.21 | 56.1 | 0.75 | 19.1 | – | 0.08 |
| 3/8″ | D3S4 | 1/2″ | Steel | 2.21 | 56.1 | 0.75 | 19.1 | – | 0.08 |
| 1/2″ | D4S3 | 3/8″ | Steel | 2.53 | 64.3 | 0.75 | 19.1 | – | 0.10 |
| 1/2″ | D4S3-B | 3/8″ | Brass | 2.53 | 64.3 | 0.75 | 19.1 | – | 0.11 |
| 1/2″ | D4S4 | 1/2″ | Steel | 2.53 | 64.3 | 0.75 | 19.1 | – | 0.12 |
| 1/2″ | D4S4-B | 1/2″ | Brass | 2.53 | 64.3 | 0.75 | 19.1 | – | 0.12 |
| 1/2″ | D4S4-S | 1/2″ | 303 Stainless | 2.53 | 64.3 | 0.75 | 19.1 | – | 0.12 |
| 1/2″ | D4S6 | 3/4″ | Steel | 2.53 | 64.3 | 0.94 | 23.9 | – | 0.18 |
| 1/2″ | D4S6-B | 3/4″ | Brass | 2.53 | 64.3 | 0.94 | 23.9 | – | 0.18 |
| 3/4″ | D6S4 | 1/2″ | Steel | 3.49 | 88.7 | 1.52 | 38.6 | – | 0.19 |
| 3/4″ | D6S6 | 3/4″ | Steel | 3.49 | 88.7 | 1.52 | 38.6 | – | 0.23 |
| 3/4″ | D6S8 | 1″ | Steel | 3.49 | 88.7 | 1.52 | 38.6 | – | 0.36 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4", 3/8", 1/2", 3/4" |
| Part Number | D2S2, D2S2-B, D2S2-S, D2S2.5, D2S3, D2S3-B, D2S3-S, D3S2, D3S3, D3S3-B, D3S3-S, D3S4, D4S3, D4S3-B, D4S4, D4S4-B, D4S4-S, D4S6, D4S6-B, D6S4, D6S6, D6S8 |
| Material | Steel, Brass, 303 Stainless |
Be the first to review “DF-Series Industrial Interchange Nipple (Standard Hose Barb)”
You must be logged in to post a review.
Related products
RM39.50 – RM399.00
RM30.50 – RM398.50
RM30.00 – RM38.50
RM46.50 – RM472.00
Reviews
There are no reviews yet.