e-sales@shinyo-ecommerce.com
| SPECIFICATIONS | • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. • Nitrile (Buna-N) seals are standard • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel tubular valve |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 30- Series Automatic Interchange • Hansen 3000, 4000, 5000 and 6000 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler. |
| SIZE | PART NUMBER | HOSE ID | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | 2DE2-B | 1/4” x 1/2” | Brass | 2.69 | 68.3 | 0.98 | 24.9 | 11/16″ | 0.38 |
| 1/4″ | 2DH2-B | 1/4” x 5/8” | Brass | 2.79 | 70.9 | 0.98 | 24.9 | 11/16″ | 0.38 |
| 1/4″ | 2DK3-B | 3/8” x 11/16” | Brass | 2.79 | 70.9 | 0.98 | 24.9 | 11/16″ | 0.39
|
| 1/4″ | 2DL3-B | 3/8” x 3/4” | Brass | 2.85 | 72.4 | 0.98 | 24.9 | 11/16″ | 0.39 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
* Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination.
Consult hose manufacturer’s catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
* Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4" |
| Part Number | 2DE2-B, 2DH2-B, 2DK3-B, 2DL3-B |
Be the first to review “DF-Series Industrial Interchange Coupler (Reusable Barb)”
Related products
Reviews
There are no reviews yet.