e-sales@shinyo-ecommerce.com
| SPECIFICATION | • Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst • Rated pressure when connected with Brass F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 9,000 PSI (620 bar) Burst • Rated pressure when connected with Steel F-Series Manual Couplers: 500 PSI (35 bar) Maximum Working and 6,500 PSI (448 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Steel componentry is plated using ROHS Compliant Trivalent Chrome |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 30- Series Automatic Interchange & Parker 20-Series Manual Interchange • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler. |
| SIZE | PART NUMBER | THREADS | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | D2F1 | 1/8″ – 27 NPTF | Steel | 1.44 | 36.6 | 0.65 | 16.5 | 9/6″ | 0.03 |
| 1/4″ | D2F2 | 1/4” – 18 NPTF | Steel | 1.66 | 42.2 | 0.79 | 20.1 | 11/16″ | 0.03 |
| 1/4″ | D2F2-B | 1/4” – 18 NPTF | Brass | 1.66 | 42.2 | 0.79 | 20.1 | 11/16″ | 0.05 |
| 1/4″ | D2F2-S | 1/4” – 18 NPTF | 303 Stainless | 1.66 | 42.2 | 0.79 | 20.1 | 11/16″ | 0.05 |
| 1/4″ | D2BF2 | 1/4” – 19 BSPP | Steel | 1.66 | 42.2 | 0.79 | 20.1 | 11/16″ | 0.03 |
| 1/4″ | D2F3 | 3/8” – 18 NPTF | Steel | 1.66 | 42.2 | 1.01 | 25.7 | 7/8″ | 0.08 |
| 1/4″ | D2F3-B | 3/8” – 18 NPTF | Brass | 1.66 | 42.2 | 1.01 | 25.7 | 7/8″ | 0.08 |
| 1/4″ | D2F3-S | 3/8” – 18 NPTF | 303 Stainless | 1.66 | 42.2 | 1.01 | 25.7 | 7/8″ | 0.08 |
| 1/4″ | D2BF3 | 3/8” – 19 BSPP | Steel | 1.66 | 42.2 | 1.01 | 25.7 | 7/8″ | 0.08 |
| 3/8″ | D3F2 | 1/4” – 18 NPTF | Steel | 1.78 | 45.2 | 0.79 | 20.1 | 11/16″ | 0.06 |
| 3/8″ | D3F3 | 3/8” – 18 NPTF | Steel | 1.78 | 45.2 | 1.01 | 25.7 | 7/8″ | 0.09 |
| 3/8″ | D3F3-B | 3/8” – 18 NPTF | Brass | 1.78 | 45.2 | 1.01 | 25.7 | 7/8″ | 0.10 |
| 3/8 | D3F3-S | 3/8” – 18 NPTF | 303 Stainless | 1.78 | 45.2 | 1.01 | 25.7 | 7/8″ | 0.09 |
| 3/8 | D3BF3 | 3/8” – 19 BSPP | Steel | 1.78 | 45.2 | 1.01 | 25.7 | 7/8″ | 0.09 |
| 3/8 | D3F4 | 1/2” – 14 NPTF | Steel | 1.94 | 49.3 | 1.16 | 29.5 | 1″ | 0.13 |
| 1/2″ | D4F3 | 3/8” – 18 NPTF | Steel | 2.10 | 53.3 | 1.01 | 25.7 | 7/8″ | 0.12 |
| 1/2″ | D4F4 | 1/2” – 14 NPTF | Steel | 2.27 | 57.7 | 1.16 | 29.5 | 1″ | 0.17 |
| 1/2″ | D4F4-B | 1/2” – 14 NPTF | Brass | 2.27 | 57.7 | 1.16 | 29.5 | 1″ | 0.19 |
| 1/2″ | D4F4-S | 1/2” – 14 NPTF | 303 Stainless | 2.27 | 57.7 | 1.16 | 29.5 | 1″ | 0.17 |
| 1/2″ | D4BF4 | 1/2” – 14 BSPP | Steel | 2.27 | 57.7 | 1.16 | 29.5 | 1″ | 0.17 |
| 1/2″ | D4F6 | 3/4” – 14 NPTF | Steel | 2.30 | 58.4 | 1.37 | 34.8 | 1 3/16″ | 0.26 |
| 1/2″ | D4F6-B | 3/4” – 14 NPTF | Brass | 2.30 | 58.4 | 1.37 | 34.8 | 1 3/16″ | 0.26 |
| 3/4″ | D6F4 | 1/2” – 14 NPTF | Steel | 2.22 | 56.4 | 1.52 | 38.6 | 1 5/16″ | 0.23 |
| 3/4″ | D6F6 | 3/4” – 14 NPTF | Steel | 2.22 | 56.4 | 1.52 | 38.6 | 1 5/16″ | 0.34 |
| 3/4″ | D6F8 | 1”- 11½” NPTF | Steel | 2.41 | 61.2 | 1.80 | 45.7 | 1 9/16″ | 0.47 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air
tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator,
safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4", 3/8", 1/2", 3/4" |
| Part Number | D2F1, D2F2, D2F2-B, D2F2-S, D2BF2, D2F3, D2F3-B, D2F3-S, D2BF3, D3F2, D3F3, D3F3-B, D3F3-S, D3BF3, D3F4, D4F3, D4F4, D4F4-B, D4F4-S, D4BF4, D4F6, D4F6-B, D6F4, D6F6, D6F8 |
| Material | Steel, Brass, 303 Stainless |
Be the first to review “DF-Series Industrial Interchange Nipple (Female Threads)”
You must be logged in to post a review.
Related products
RM39.50 – RM399.00
RM30.00 – RM385.00
RM30.00 – RM38.50
RM46.50 – RM472.00
Reviews
There are no reviews yet.