e-sales@shinyo-ecommerce.com
| SPECIFICATION | • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. • Nitrile (Buna-N) seals are standard • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel tubular valve |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 30- Series Automatic Interchange • Hansen 3000, 4000, 5000 and 6000 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler |
| SIZE | PART NUMBER | HOSE ID | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | 2DS2-B | 1/4″ | Brass | 2.90 | 73.7 | 0.98 | 24.9 | 11/16″ | 0.27 |
| 1/4″ | 2DS2-S | 1/4″ | 303 Stainless | 2.90 | 73.7 | 0.98 | 24.9 | 11/16″ | 0.27 |
| 1/4″ | 2DS3-B | 3/8″ | Brass | 2.90 | 73.7 | 0.98 | 24.9 | 11/16″ | 0.27 |
| 1/4″ | 2DS3-S | 3/8″ | 303 Stainless | 2.90 | 73.7 | 0.98 | 24.9 | 11/16″ | 0.28 |
| 3/8″ | 3DS2-B | 1/4″ | Brass | 3.00 | 76.2 | 1.18 | 30.0 | 7/8″ | 0.37 |
| 3/8″ | 3DS3-B | 3/8″ | Brass | 3.00 | 76.2 | 1.18 | 30.0 | 7/8″ | 0.39 |
| 3/8″ | 3DS3-S | 3/8″ | 303 Stainless | 3.00 | 76.2 | 1.18 | 30.0 | 7/8″ | 0.39 |
| 3/8″ | 3DS4-B | 1/2” | Brass | 3.00 | 76.2 | 1.18 | 30.0 | 7/8″ | 0.41 |
| 1/2″ | 4DS3-B | 3/8″ | Brass | 3.51 | 89.2 | 1.34 | 34.0 | 1 1/16″ | 0.56 |
| 1/2″ | 4DS4-B | 1/2″ | Brass | 3.51 | 89.2 | 1.34 | 34.0 | 1 1/16″ | 0.59 |
| 1/2″ | 4DS4-S | 1/2″ | 303 Stainless | 3.51 | 89.2 | 1.34 | 34.0 | 1 1/16″ | 0.59 |
| 1/2″ | 4DS6-B | 3/4″ | Brass | 3.51 | 89.2 | 1.34 | 34.0 | 1 1/16″ | 0.65 |
| 3/4″ | 6DS4-B | 1/2″ | Brass | 3.00 | 76.2 | 1.73 | 43.9 | 1 5/16″ | 0.90 |
| 3/4″ | 6DS6-B | 3/4″ | Brass | 3.00 | 76.2 | 1.73 | 43.9 | 1 5/16″ | 0.93 |
| 3/4″ | 6DS8-B | 1″ | Brass | 3.24 | 82.3 | 1.73 | 43.9 | 1 5/16″ | 1.03 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4", 3/8", 1/2", 3/4" |
| Part Number | 2DS2-B, 2DS2-S, 2DS3-B, 2DS3-S, 3DS2-B, 3DS3-B, 3DS3-S, 3DS4-B, 4DS3-B, 4DS4-B, 4DS4-S, 4DS6-B, 6DS4-B, 6DS6-B, 6DS8-B |
| Material | Brass, 303 Stainless |
Be the first to review “D-Series Automatic Industrial Interchange Coupler (Standard Hose Barb)”
You must be logged in to post a review.
Related products
RM30.00 – RM38.50
RM13.50 – RM103.00
RM50.50 – RM123.50
RM7.50 – RM102.50
Reviews
There are no reviews yet.