e-sales@shinyo-ecommerce.com
| SPECIFICATION | • Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 bar) Maximum Working and 8,500 PSI (586 bar) Burst • Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 9,000 PSI (620 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. • Nitrile (Buna-N) seals are standard • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel sleeve and steel tubular valve |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 20-Series Manual Interchange • Hansen 1000, 400 and 500 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler. |
| SIZE | PART NUMBER | THREADS | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | 2FM1-B | 1/8” – 27 NPTF | Brass | 1.97 | 50.0 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FM1-S | 1/8” – 27 NPTF | 303 Stainless | 1.97 | 50.0 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FBM1-B | 1/8” – 28 BSPT | Brass | 1.97 | 50.0 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FM2 | 1/4” – 18 NPTF | Steel | 2.04 | 51.8 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FM2-B | 1/4” – 18 NPTF | Brass | 2.04 | 51.8 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 1/4″ | 2FM2-S | 1/4” – 18 NPTF | 303 Stainless | 2.04 | 51.8 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FBM2-B | 1/4” – 19 BSPT | Brass | 2.04 | 51.8 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 1/4″ | 2FM3-B | 3/8” – 18 NPTF | Brass | 2.08 | 52.8 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 1/4″ | 2FM3-S | 3/8” – 18 NPTF | 303 Stainless | 2.08 | 52.8 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 1/4″ | 2FBM3-B | 3/8” – 19 NPTF | Brass | 2.08 | 52.8 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 3/8″ | 3FM2 | 1/4” – 18 NPTF | Steel | 2.45 | 62.2 | 1.06 | 26.9 | 7/8″ | 0.26 |
| 3/8″ | 3FM3 | 3/8” – 18 NPTF | Steel | 2.46 | 62.5 | 1.06 | 26.9 | 7/8″ | 0.27 |
| 3/8″ | 3FM3-S | 3/8” – 18 NPTF | 303 Stainless | 2.46 | 62.5 | 1.06 | 26.9 | 7/8″ | 0.28 |
| 3/8″ | 3FBM3 | 3/8” – 19 BSPT | Steel | 2.46 | 62.5 | 1.06 | 26.9 | 7/8″ | 0.27 |
| 3/8″ | 3FM4 | 1/2” – 14 NPTF | Steel | 2.55 | 64.8 | 1.06 | 26.9 | 7/8″ | 0.29 |
| 1/2″ | 4FM3 | 1/2” – 14 NPTF | Steel | 2.97 | 75.4 | 1.19 | 30.2 | 1″ | 0.42 |
| 1/2″ | 4FM4 | 1/2” – 14 NPTF | Steel | 3.07 | 78.0 | 1.19 | 30.2 | 1″ | 0.45 |
| 1/2″ | 4FM4-S | 1/2” – 14 NPTF | 303 Stainless | 3.07 | 78.0 | 1.19 | 30.2 | 1″ | 0.47 |
| 1/2″ | 4FBM4 | 1/2” – 14 BSPT | Steel | 3.07 | 78.0 | 1.19 | 30.2 | 1″ | 0.45 |
| 1/2″ | 4FM6 | 3/4” – 14 NPTF | Steel | 3.12 | 79.2 | 1.19 | 30.2 | 1″ | 0.50 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4", 3/8", 1/2" |
| Part Number | 2FM1-B, 2FM1-S, 2FBM1-B, 2FM2, 2FM2-B, 2FM2-S, 2FBM2-B, 2FM3-B, 2FM3-S, 2FBM3-B, 3FM2, 3FM3, 3FM3-S, 3FBM3, 3FM4, 4FM3, 4FM4, 4FM4-S, 4FBM4, 4FM6 |
| Material | Steel, Brass, 303 Stainless |
Be the first to review “F-Series Manual Industrial Interchange Coupler (Male Threads)”
You must be logged in to post a review.
Related products
RM47.50 – RM426.50
RM46.50 – RM472.00
RM30.00 – RM385.00
Reviews
There are no reviews yet.