e-sales@shinyo-ecommerce.com
| SPECIFICATION | • Rated pressure for connected Steel Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 6,500 PSI (448 bar) Burst |
| CONSTUCTION | • Machined components are manufactured using solid bar stock. • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. • Nitrile (Buna-N) seals are standard • Steel componentry is plated using ROHS Compliant Trivalent Chrome. • Steel sleeve and steel tubular valve |
| COMPATIBILITY & INTERCHANGE DATA |
• Foster 3, 4, 5 and 6 Series • Parker 20-Series Manual Interchange • Hansen 1000, 400 and 500 |
| HOW IT WORKS | • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free. • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand. • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted. • After the line is fully exhausted, you are able to safely separate the nipple from the coupler |
| SIZE | PART NUMBER | HOSE ID | MATERIAL | LENGTH | Maximum OD | HEX Inch | Weight Lb | ||
| inch | mm | inch | mm | ||||||
| 1/4″ | 2FS2 | 1/4″ | Steel | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FS2-B | 1/4″ | Brass | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FS2-S | 1/4″ | 303 Stainless | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FS2.5-B | 5/16” | Brass | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FS3-B | 3/8″ | Brass | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.18 |
| 1/4″ | 2FS3-S | 3/8″ | 303 Stainless | 2.53 | 64.3 | 0.88 | 22.4 | 3/4″ | 0.19 |
| 3/8″ | 3FS2 | 1/4″ | Steel | 2.86 | 72.6 | 1.06 | 26.9 | 7/8″ | 0.27 |
| 3/8″ | 3FS3 | 3/8″ | Steel | 2.86 | 72.6 | 1.06 | 26.9 | 7/8″ | 0.27 |
| 3/8″ | 3FS3-S | 3/8″ | 303 Stainless | 2.86 | 72.6 | 1.06 | 26.9 | 7/8″ | 0.28 |
| 3/8″ | 3FS4 | 1/2″ | Steel | 2.86 | 72.6 | 1.06 | 26.9 | 7/8″ | 0.28 |
| 1/2″ | 4FS3 | 3/8″ | Steel | 3.49 | 88.6 | 1.19 | 30.2 | 1″ | 0.41 |
| 1/2″ | 4FS4 | 1/2″ | Steel | 3.49 | 88.6 | 1.19 | 30.2 | 1″ | 0.43 |
| 1/2″ | 4FS4-S | 1/2″ | 303 Stainless | 3.49 | 88.6 | 1.19 | 30.2 | 1″ | 0.43 |
| 1/2″ | 4FS6 | 3/4″ | Steel | 3.49 | 88.6 | 1.19 | 30.2 | 1″ | 0.48 |
*It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
WARNING: Cancer and Reproductive Harm
| Weight | 1 kg |
|---|---|
| Size | 1/4", 3/8", 1/2" |
| Part Number | 2FS2, 2FS2-B, 2FS2-S, 2FS2.5-B, 2FS3-B, 2FS3-S, 3FS2, 3FS3, 3FS3-S, 3FS4, 4FS3, 4FS4, 4FS4-S, 4FS6 |
| Material | Steel, Brass, 303 Stainless |
Be the first to review “F-Series Manual Industrial Interchange Coupler (Standard Hose Barb)”
You must be logged in to post a review.
Related products
RM30.00 – RM38.50
RM40.00 – RM123.00
RM50.50 – RM123.50
Reviews
There are no reviews yet.