e-sales@shinyo-ecommerce.com
Features:
- Machined components are manufactured using solid steel bar stock.
- Stainless steel springs, carbon steel balls, retaining rings, and springs maximize corrosion resistance and extend service life.
- Steel component is plated using chrome-over-nickel plating.
- Standard seal is Nitrile (Buna N)
- Interchangeable with Snaptite 71 Series, Dixon ST Series.
| SIZE | A | B (Hex)* | C (Hex)* | D (Dia) | E | F | G |
| 1/4″ (mm) | 3.27 (83.06) | 0.81 (20.57) | 0.94 (23.88) | 1.19 (49.78) | 1.96 (49.78) | 1.84 (46.74) | 0.53 (13.46) |
| 3/8″ (mm) | 4.00 (101.60) | 1.00 (25.40) | 1.19 (30.23) | 1.56 (39.62) | 2.36 (59.95) | 2.32 (58.93) | 0.63 (17.27) |
| 1/2″ (mm) | 4.43 (112.52) | 1.50 (38.10) | 1.50 (38.10) | 1.88 (47.75) | 2.77 (70.36) | 2.38 (60.45) | 0.72 (18.29) |
| 3/4″ (mm) | 5.13 (130.30) | 1.75 (44.45) | 1.75 (44.45) | 2.25 (57.15) | 3.05 (77.47) | 2.96 (75.18) | 0.88 (22.35) |
| 1″ (mm) | 5.60 (142.24) | 1.88 (47.75) | 2.00 (50.80) | 2.63 (66.80) | 3.32 (84.33) | 3.23 (82.04) | 0.95 (24.13) |
| 1 1/4″ (mm) | 6.22 (157.99) | 2.00 (50.80) | 2.00 (50.80) | 2.63 (66.80) | 3.67 (93.22) | 3.50 (88.90) | 0.95 (24.13) |
| SIZE | A | B (Hex)* | C (Hex)* | D (Dia) | E | F | G |
| 1 1/2″ (mm) | 7.60 (193.04) | 3.25 (82.55) | 3.38 (85.85) | 4.50 (114.30) | 6.21 (157.73) | 4.50 (114.30) | 3.21 (81.53) |
| 2″ (mm) | 7.60 (193.04) | 3.25 (82.55) | 3.38 (85.85) | 4.50 (114.30) | 6.21 (157.73) | 4.50 (114.30) | 3.21 (81.53) |
*Hex dimensions are taken from flat of hex and not across corners. Hex may be substituted with round stock. Hex column would then indicate dimension taken across wrench flats. Decimal dimensions are ± 0.6in. (1.5mm). Dimensions are subject to change notice. Part configurations are typical and do not necessarily represent actual appearances
| ACCESSORIES | SS | C | 25- | 25 | F | ||
| SERIES | MATERIAL | COUPLING TYPE | COUPLING SIZE | END FITTING SIZE | END FITTING TYPE | SEALS | OPTIONS |
| QRC 7 | BR
Brass
SS 316 Stainless Steel
ST Steel
|
C
Coupler
N Nipple |
8 = 1/4″
10 = 3/8″ 15 = 1/2″ 20 = 3/4″ 25 = 1″ 32 = 1 1/4″ 40 – 1 1/2″ 50 = 2″ |
8 = 1/4″
10 = 3/8″ 15 = 1/2″ 20 = 3/4″ 25 = 1″ 32 = 1 1/4″ 40 – 1 1/2″ 50 = 2″ |
F
Female NPT
M Male NPT
H Hose End |
Std.seal is Buna
V Viton
E Ethylene Propylene Rubber
M MIL-H-5606 |
SL
Sleeve Lock |
| ACCESSORIES | ||
| COUPLER DUST PLUG | NIPPLE DUST CAP | |
| SIZE | 7 Series | 7 Series |
| 1/8″ | N/A | N/A |
| 1/4″ | 7-SDP-8 | 7-SDC-8 |
| 3/8″ | 7-SDP-10 | 7-SDC-10 |
| 1/2″ | 7-SDP-15 | 7-SDC-15 |
| 3/4″ | 7-SDP-20 | 7-SDC-20 |
| 1″ | 7-SDP-25 | 7-SDC-25 |
| 1 1/4″ | 7-SDP-32 | 7-SDC-32 |
| 2″ | 7-SDP-50 | 7-SDC-50 |
*Upon request
| WORKING PRESSURE | ||
| SIZE | PRESURE | |
| PSI | BAR | |
| 1/4″ | 5000 | 344 |
| 3/8″ | 5000 | 344 |
| 1/2″ | 5000 | 344 |
| 3/4″ | 5000 | 344 |
| 1″ | 4000 | 275 |
| 1 1/4″ | 4000 | 275 |
| 2″ | 3000 | 206 |
*Based on Stainless Steel material
| Weight | 1 kg |
|---|
Be the first to review “Maxlock® QRC 7 Series”
You must be logged in to post a review.
Reviews
There are no reviews yet.